Fusion FWD L4-2.3L VIN Z (2007)
2.
Add audio unit jumper to connector C290D and audio unit. (Figure 1).
NOTE
THE AUDIO JUMPER IS ADDED TO FILTER ANY UNNECESSARY ELECTRICAL LOADS NOISES DURING NORMAL OPERATION.
3.
Install the audio unit. Refer to the WSM, Section 415-00.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
080808A
2007-2008 Fusion/Milan:
0.4 Hr.
Install Audio Jumper
Harness, Includes Time To
Diagnose, Remove And
Install Audio Unit (Do Not
Use With 18805E)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
18808
X2
Disclaimer