Fusion FWD L4-2.3L VIN Z (2007)
5. Spread the doors inner sheet metal panel using wide jaw sheet metal pliers until the specified dimensions 1 5/32" to 1 3/16" (29.5 - 30.0 mm).
(Figures 3 and 4)
6. Remove and replace the glass assembly and reinstall all the glass moulding and door panel. Refer to WSM, Section 501-11
NOTE
IF ABNORMAL WINDOW REGULATOR NOISES ARE STILL PRESENT, DURING NORMAL WINDOW OPERATION AND AFTER
PERFORMING THIS PROCEDURE, FOLLOW NORMAL DIAGNOSIS IN WORKSHOP MANUAL SECTION 501-11.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATIONDESCRIPTION
TIME
091204A
2006-2009
0.4 Hr.