Fusion FWD L4-2.3L VIN Z (2007)
Seats with heat or side air bags
15. Connect the heated seat and side air bag electrical connectors.
-
If equipped, connect the heated seat electrical connector, route the wire harness and attach any pin-type retainers.
-
If equipped, connect the side air bag module electrical connector, then slide and engage the side air bag electrical connector locking clip.
Route the wire harness and attach any pin-type retainers.
16. Attach the first cushion trim cover J-clip to the rear of the cushion frame.
All seats
17. Attach the hook and loop strip and fasten the cushion trim cover around the safety belt buckle.
18. Install the LH recliner outboard cover and retainer to the recliner.