Fusion FWD L4-2.3L VIN Z (2007)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the parking brake cable from the brake caliper.
^
Pull back the parking brake lever.
^
Disconnect the cable from the parking brake lever.
^
Remove the cable conduit retaining clip.
^
Disconnect the cable from the brake caliper.
3. CAUTION: Do not pry in the caliper sight hole to retract the pistons, as this can damage the pistons and boots.
CAUTION: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.