Fusion FWD L4-2.3L VIN Z (2007)
1. Remove the 2 nuts, the bolt and the generator air inlet duct.
2. Disconnect the 4 ignition coil-on-plug electrical connectors.
3. NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.
Remove the 4 bolts and the ignition coil-on-plugs.
4. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
Remove the 4 spark plugs.
Installation
