Fusion FWD L4-2.3L VIN Z (2007)
3. NOTE: For vehicles with a 3.5L engine, remove the engine appearance cover.
Remove the bolt and the windshield washer reservoir filler tube.
High beam bulb, vehicles without ABS
4. Disconnect the windshield washer reservoir filler tube.
Low beam or high beam bulb
5. Remove the headlamp bulb protective cover.
6. Remove the headlamp bulb.
-
Disconnect the electrical connector.
7. To install, reverse the removal procedure.
-
Make sure the headlamp bulb protective cover is completely sealed.