Fusion FWD L4-2.3L VIN Z (2007)
Drive Belt: Service and Repair
Accessory Drive Belt
Accessory Drive Belt Routing
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 4 screws and position the RH fender splash shield aside.
3. Remove the 6 pin-type retainers and the RH splash shield.
4. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the coolant pump pulley.
^
Remove the accessory drive belt from the engine.
5. To install, reverse the removal procedure.