Fusion FWD L4-2.3L VIN Z (2007)
Transmission Position Switch/Sensor: Adjustments
Transmission Range (TR) Sensor Adjustment
Special Tools
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the transmission range (TR) sensor electrical connector and the selector lever cable end.
3. NOTE: Failure to hold the shift lever, while loosening or tightening the manual shaft lever, will transmit rotational torque to the TR
switch and shift mechanism causing internal damage.
Loosen the TR sensor (the automatic transaxle is shown removed for clarity).
1. Remove the nut and the manual control lever.
2. Loosen the TR sensor bolts.
4. Using the special tool, align the TR sensor and tighten the bolts.
-
Tighten to 10 Nm (89 inch lbs.).