Fusion FWD L4-2.3L VIN Z (2007)
-
Remove the 2 rivets and DCSM.
Installation
1. Install the dual climate controlled seat module (DCSM) to the seat.
-
Position the DCSM to the electrical bracket and install 2 new rivets.
-
Connect the 3 DCSM electrical connectors and locking wedges.
2. Install the front seat and repower the SRS. Do not prove out the SRS at this time.
3. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS.
4. Install the DCSM software data. Carry out the appropriate steps in the PMI procedure.
