Fusion FWD L4-2.3L VIN Z (2007)
All vehicles
2. NOTE: Selector lever removed for clarity.
Install the PRNDL bezel, selector lever knob and knob bezel on the selector lever.
-
Make sure that the 3 locking tabs are locked in place.
Vehicles equipped with a TC switch
3. Connect the TC switch electrical connector and install the wiring harness retainer on the selector lever housing.
Vehicles equipped with LED illumination
4. Connect the LED electrical connector.
Vehicles equipped with a light bulb
5. Connect the light to the PRNDL bezel.