Fusion FWD L4-2.3L VIN Z (2007)
Transmission Cooler: Initial Inspection and Diagnostic Overview
Transaxle Cooling - 6 Speed
Special Tools
Material
Inspection and Verification
1. Verify the customers concern by operating the vehicle to duplicate the condition.
2. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
3. Install new components if a fluid leak is found in any of the transaxle cooling components.
4. If the concern(s) remains after the inspection, determine the symptom(s). GO to Symptom Chart. See: Symptom Related Diagnostic
Procedures/Transaxle Cooling - 6 Speed
Transaxle Cooling - FNR5
Special Tools
Material
Inspection and Verification
1. Verify the customers concern by operating the vehicle to duplicate the condition.
2. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
3. Install new components if a fluid leak is found in any of the transaxle cooling components.
4. If the concern(s) remains after the inspection, determine the symptom(s). GO to Symptom Chart. See: Symptom Related Diagnostic
Procedures/Transaxle Cooling - FNR5