Fusion FWD L4-2.5L Hybrid (2010)
Parking Assist Distance Sensor: Service and Repair
Parking Aid Sensor
Removal and Installation
1. Remove the rear bumper cover. For additional information, refer to Bumper.
2. Disconnect the parking aid sensor(s) electrical connector(s).
3. Pry the retaining tabs with a suitable tool, such as a flat bladed screwdriver and remove the parking aid sensor(s).
4. To install, reverse the removal procedure.
-
Carry out the azimuth and elevation system check. For additional information, refer to Azimuth System Check See: Testing and
Inspection/Component Tests and General Diagnostics/Azimuth System Check and Elevation System Check See: Testing and
Inspection/Component Tests and General Diagnostics/Elevation System Check.