Fusion FWD L4-2.5L Hybrid (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Grille
Upper cowl panel grille
1. Remove the 2 wiper pivot arms nuts.
-
To install, tighten to 20 Nm (177 lb-in).
2. Remove the LH and RH wiper pivot arms.
3. Remove the 2 pin-type retainers from the upper cowl panel grille.
4. Remove the 2 bolts from the upper cowl panel grille.
5. Remove the 2 retaining clips and the upper cowl panel grille.
3.5L only