Fusion FWD L4-2.5L Hybrid (2010)
Seat Cover: Service and Repair
Seat Cushion Cover - Front
Seat Cushion Cover - Front
Removal and Installation
1. Remove the front seat backrest. For additional information, refer to Seat Backrest - Front, Without Fold Flat See: Seat Back/Service and
Repair/Removal and Replacement/Seat Backrest - Front, Without Fold Flat or Seat Backrest - Front, With Fold Flat See: Seat Back/Service and
Repair/Removal and Replacement/Seat Backrest - Front, With Fold Flat.
2. NOTE: Trim cover J-clip configurations vary with seat option.
Release all the remaining J-clips attaching the trim cover to the cushion frame.
3. NOTICE: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the cushion foam pad.
Release the hook-and-loop strips, remove the hog rings (if equipped), separate the cushion trim cover from the cushion foam pad and remove.
4. To install, reverse the removal procedure.
