Fusion FWD L4-2.5L Hybrid (2010)
14. Connect the heated seat and side air bag electrical connectors.
-
If equipped, connect the heated seat electrical connector, route the wire harness and attach any pin-type retainers.
-
Connect the side air bag module electrical connector, then slide and engage the side air bag electrical connector locking clip. Route the wire
harness and attach any pin-type retainers.
15. Attach the first cushion trim cover J-clip to the rear of the cushion frame.
16. Attach the hook-and-loop strip and fasten the cushion trim cover around the safety belt buckle.
17. Install the LH recliner outboard cover and retainer to the recliner.
-
If equipped, route the heated seat wire harness to the LH recliner outboard cover.
18. Install the RH recliner outboard cover, retainer and retainer cover.
-
Route the side air bag wire harness to the RH recliner outboard cover.