Fusion FWD L4-2.5L Hybrid (2010)
16. Using the flats on the camshaft to prevent camshaft rotation, remove the bolt and exhaust camshaft drive gear.
17. Remove the timing chain from the camshaft phaser and sprocket.
18. Mark the position of the camshaft lobes on the No. 1 cylinder for installation reference.
19. NOTICE: Failure to follow the camshaft loosening procedure can result in damage to the camshafts.
NOTE: Mark the location and orientation of each camshaft bearing cap.
Remove the camshafts from the engine.
-
Loosen the camshaft bearing cap bolts, in sequence, one turn at a time until all tension is released from the camshaft bearing caps.
-
Remove the bolts and the camshaft bearing caps.
-
Remove the camshafts.
