Fusion FWD L4-2.5L Hybrid (2010)
![background image](/ford/fusion_fwd/l4-2.5l_hybrid/Page-621006.png)
15. Remove the Crankshaft TDC Timing Peg.
16. Install the engine plug bolt.
-
Tighten to 20 Nm (177 lb-in).
17. Install the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
18. Install the RF wheel and tire. For additional information, refer to Wheels and Tires.
19. Install the valve cover. For additional information, refer to Valve Cover See: Service and Repair/Removal and Replacement/Valve Cover.