Fusion FWD L4-2.5L Hybrid (2010)
![background image](/ford/fusion_fwd/l4-2.5l_hybrid/Page-2728001.png)
Tail Lamp: Service and Repair
Rear Lamp Assembly
NOTE: Fusion shown, Milan and MKZ similar.
Removal and Installation
1. Remove the pin-type retainer and position the luggage compartment trim panel aside.
2. Remove the 3 nuts and the rear lamp assembly.
-
Disconnect the electrical connectors.
-
To install, tighten the nuts to 6 Nm (53 lb-in).
3. To install, reverse the removal procedure.