Fusion FWD L4-2.5L Hybrid (2010)
13. NOTICE: Do not pull the electrical connectors out by the Connector Position Assurance (CPA) clip. Damage to the clip can occur.
Using an appropriate tool, lift up and release the Connector Position Assurance (CPA) clips and disconnect the 2 electrical connectors.
14. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
15. Remove the RH C-pillar trim cover retainer cap.
16. Remove the retainer and RH C-pillar trim cover.
17. Disconnect the RH side air curtain module electrical connector.
18. Remove the LH C-pillar trim cover retainer cap.
19. Remove the retainer and LH C-pillar trim cover.
20. Disconnect the LH side air curtain module electrical connector.
21. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.