Fusion FWD L4-2.5L Hybrid (2010)
14. Using a paint pen, number the solenoids and solenoid body to clearly mark which solenoid was removed from which bore in the solenoid body.
15. Remove the solenoid retaining pin(s).
16. Remove the solenoid(s) from the solenoid body.
Installation
1. Inspect the solenoid(s) for damage.
2. If a new solenoid is not being installed, install the solenoid(s) into the bore from which it was removed.
3. If installing a new Variable Force Solenoid (VFS), determine the base part number of the solenoid(s). The
Torque Converter Clutch (TCC) solenoid, Shift Solenoid A (SSA) and Shift Solenoid C (SSC) are all normally low pressure solenoids. The Line
Pressure Control (LPC) solenoid, Shift Solenoid B (SSB) and