Fusion FWD L4-2.5L Hybrid (2010)
8. Install a bead of sealer to the fluid pan.
9. Using new pan bolts, install the fluid pan.
-
Tighten to 13 Nm (115 lb-in).
10. NOTE: Lubricate the new O-rings with clean automatic transmission fluid and install them onto the transmission fluid cooler tubes.
Connect the transmission fluid cooler tubes to the transaxle.
-
Tighten to 10 Nm (89 lb-in).
11. Install the transmission fluid drain plug.
-
Tighten to 47 Nm (35 lb-ft).