Fusion FWD L4-2.5L Hybrid (2010)
Flywheel: Procedures
Flywheel Runout Check
Flywheel Runout Check
1. Mount the Dial Indicator Gauge with Holding Fixture so that the Dial Indicator Gauge contact point rides on the clutch disc contact surface.
2. Rotate the flywheel and check the runout.
-
If the runout exceeds the maximum runout 0.076 mm (0.0034 in), install a new flywheel.
Flywheel Inspection
Flywheel Inspection
1. NOTE: The flywheel cannot be resurfaced, it must be replaced.
Inspect the flywheel for:
1. any cracks.
2. worn ring gear teeth.
3. chipped or cracked ring gear teeth.
4. scratches, nicks and discoloration.