Fusion FWD V6-3.0L (2009)
Seat Cushion: Removal and Replacement
Seat Cushion Cover - Rear
Seat Cushion Cover - Rear
1. Remove the rear seat cushion. For additional information, refer to Seat Cushion - Rear See: Seat Cushion - Rear.
2. Release the drawstring and remove the hog rings.
3. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the backrest foam pad.
Partially invert the trim cover and release the hook-and-loop strips up to the hog rings.
4. Remove the hog rings and continue to release the hook-and-loop strips and separate the trim cover from the foam pad.
5. To install, reverse the removal procedure.
Seat Cushion - Rear
Seat Cushion - Rear
NOTE: Backrest pad and frame removed for clarity.