Fusion FWD V6-3.0L (2009)
6. Unclip the 2 radiator brackets from the radiator core support and position the cooling module rearward.
7. Remove the 2 radiator brackets.
8. NOTE: Position a drain pan underneath each power steering hose connection.
Release the 2 power steering hose clamps at the condenser and disconnect the hoses.
9. Remove the condenser manifold rivet.
10. Release the 2 condenser clips at the radiator and detach the condenser from the radiator.
11. Remove the condenser core.
12. To install, reverse the removal procedure.
-
Install new gasket seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
13. Fill the power steering system.
14. Evacuate, leak test and charge the refrigerant system.
