Fusion FWD V6-3.0L (2009)
-------------------------------------------------
S15 VERIFY VEHICLE EQUIPMENT - DCSM
-
Inspect the vehicle for a Dual Climate Controlled Seat Module (DCSM).
-
Is the vehicle equipped with a DCSM?
Yes
GO to S16.
No
GO to S17.
-------------------------------------------------
S16 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DCSM DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: BJB Fuses 11 (30A) and 12 (30A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuses. Go To Pinpoint Test P. See: Pinpoint Test P: The Dual Climate Controlled Seat Module (DCSM) Does Not Respond to
the Scan Tool
No
GO to S17.
-------------------------------------------------
S17 VERIFY VEHICLE EQUIPMENT - AUDIO DSP MODULE
-
Inspect the vehicle for an audio Digital Signal Processing (DSP) module.
-
Is the vehicle equipped with an audio DSP module?
Yes
GO to S17.
No
GO to S18.
-------------------------------------------------
S18 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE AUDIO DSP MODULE DISABLED
NOTE: When re-running the network test, the network test application must be first closed or the screen display will revert back to the prior run network
test results.
-
Disconnect: BJB Fuses 20 (20A) and 21 (20A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuses. Go To Pinpoint Test L. See: Pinpoint Test L: The Audio Digital Signal Processing (DSP) Module Does Not Respond to
the Scan Tool
No