Fusion FWD V6-3.0L (2009)
-
Tighten to 20 Nm (177 lb-in).
7. Tighten the 2 LH catalytic converter manifold bracket bolts.
-
To install, tighten to 20 Nm (177 lb-in).
8. Position the LH catalytic converter manifold shield and install the 4 bolts.
-
Tighten to 10 Nm (89 lb-in).
9. Tighten the 2 new LH catalytic converter-to-exhaust flexible pipe nuts in 3 stages:
-
Stage 1: Tighten the passenger side nut to 5 Nm (44 lb-in).
-
Stage 2: Tighten the driver side nut to 40 Nm (30 lb-ft).
-
Stage 3: Tighten the passenger side nut to 40 Nm (30 lb-ft).
10. Install the HO2S and the catalyst monitor sensor.
11. Install the oil level indicator and tube.
12. Install a new oil filter.
-
Tighten to 5 Nm (44 lb-in) and then rotate an additional 180 degrees.
