Fusion FWD V6-3.0L (2009)
4. Remove the transaxle support insulator bracket bolts.
5. Remove the transaxle support insulator frame bolts.
6. Remove the 4 screws and position the LH fender splash shield aside.
7. Remove the 6 pin-type retainers and the LH front structure-to-subframe splash shield.
8. Remove the transaxle support insulator frame bolts and remove the insulator.
Installation
1. Clean the transaxle support insulator frame bolts using a wire brush and apply new threadlock to the threads.
2. Position the transaxle support insulator in place and install the transaxle support insulator frame bolts.