Fusion FWD V6-3.0L (2009)
8. NOTE: Do not use more than the specified amount of sealer on the side cover pan or internal transaxle damage could occur.
Apply a 1.5 mm (0.059 in) thick bead of sealer to the transaxle on the side cover sealing surface.
9. Install the solenoid body cover and install the 11 bolts.
-
Tighten to 7 Nm (62 lb-in).
10. Install the battery tray.
Shift solenoids A, B, C, D, E and PCA
11. Install the affected solenoid and the bolts.
-
Tighten to 9 Nm (80 lb-in).
12. Install the affected solenoid, the bracket and the 4 shift solenoid bracket bolts.
-
Tighten to 9 Nm (80 lb-in).
Main control