Fusion FWD V6-3.0L (2009)
NOTICE: Before positioning the windshield glass, open vehicle windows to prevent the air pressure of closing doors from affecting the
urethane adhesive bond.
Using the alignment marks made previously, position the windshield glass on the pinch weld.
11. NOTE: The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
After the urethane adhesive has cured, check the windshield glass seal for air or water leaks through the urethane adhesive bead and add urethane
adhesive as necessary.
12. Install the cowl panel grille.
13. Install the headliner.
14. Install the interior mirror.
15. Install the sun visors.
16. Install the A-pillar trim panels.