Fusion FWD V6-3.5L (2010)
2. Remove the exterior door handle. For additional information, refer to Exterior Door Handle See: Front Door Handle/Front Door Exterior
Handle/Service and Repair/Exterior Door Handle.
3. On the rear doors, position the door window glass at the top of the door.
4. Loosen the exterior door handle reinforcement bolt.
-
To install, tighten to 6 Nm (53 lb-in).
5. Slide the exterior door handle reinforcement to the front of the vehicle and push inside the door.
6. Remove the 3 door latch bolts.
-
To install, tighten to 8 Nm (71 lb-in).
7. Remove the complete latch, carrier, and handle reinforcement assembly from the door.
8. Remove the release cable from the latch.
-
Slide the cable housing off the latch.
-
Unhook the cable from the latch lever.
9. To install, reverse the removal procedure.