Fusion FWD V6-3.5L (2010)
4. Release the backrest cover from around the striker opening.
Hybrid vehicle
5. Remove 2 pin-type retainers and the duct end seal.
All vehicles
6. Separate the backrest cover.
1. Disengage the lower J-strips.
-
Slide the heat deflector out from between the backrest frame and backrest cover, if equipped.
2. Disengage the 2 J-clips.
3. Disengage the backrest cover clip and unwrap the backrest cover from around the backrest frame.
4. Remove 2 pin-type retainers.
