Fusion FWD V6-3.5L (2010)
31. Install the accessory drive belt tensioner and the 3 bolts.
-
Tighten to 11 Nm (97 lb-in).
32. Install the power steering pump and the 3 bolts.
-
Tighten to 25 Nm (18 lb-ft).
33. Install the Power Steering Pressure (PSP) hose bracket and nut.
-
Tighten to 9 Nm (80 lb-in).
34. Attach the PSP hose retainer to the engine lifting eye.
35. Attach all of the wiring harness retainers to the LH valve cover and stud bolts.
36. Connect the LH camshaft VCT solenoid electrical connector.