Fusion FWD V6-3.5L (2010)
93. Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
-
Discard the bolt.
94. Using the 3 Jaw Puller, remove the crankshaft pulley.
95. Using the Oil Seal Remover, remove and discard the crankshaft front seal.
96. Remove the 2 bolts and the engine mount bracket.
97. NOTE: Only use hand tools to remove the studs.
Remove the 2 engine mount studs.
98. Remove the 3 bolts and the engine mount bracket.