Fusion FWD V6-3.5L (2010)
71. Install the ground wire and the bolt.
-
Tighten to 10 Nm (89 lb-in).
72. Connect the fuel supply tube to the fuel rail. For additional information, refer to Fuel Delivery and Air Induction.
73. Attach the power steering reservoir onto the cowl.
74. Connect the hose to the power steering reservoir.
-
Attach the pin-type retainer to the engine mount brace.
75. Install the oil level indicator.
76. Attach the 2 wiring harness retainers to the LH valve cover stud bolts.
