Fusion FWD V6-3.5L (2010)
1. Remove the Front Display Interface Module (FDIM). For additional information, refer to Accessories and Optional Equipment.
2. Remove the 2 HVAC module screws.
3. Disconnect the 2 HVAC module electrical connectors and remove the HVAC module.
Vehicles without navigation system
4. Remove the center instrument panel finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
5. Remove the 4 HVAC module screws and remove the HVAC module.
All vehicles
6. To install, reverse the removal procedure.