Fusion FWD V6-3.5L (2010)
-------------------------------------------------
A2 DETERMINE THE VEHICLE CONTENT
-
Determine the vehicle content.
-
Is the vehicle equipped with a video mirror?
Yes
GO to A13.
No
If the vehicle is equipped with the SYNC system, GO to A8.
If not equipped with the SYNC system, GO to A3.
-------------------------------------------------
A3 CHECK THE MIRROR POWER CIRCUIT FOR VOLTAGE (VEHICLES WITHOUT VIDEO MIRROR AND WITHOUT SYNC)
-
Ignition OFF.
-
Disconnect: Auto-Dimming Interior Mirror C911.
-
Ignition ON.
-
Measure the voltage between the auto-dimming interior mirror C911-1, circuit CBP41 (BU), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
GO to A4.
No
VERIFY the SJB fuse 41 (15A) is OK. If OK, REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation. If
not OK, REFER to the Wiring Diagrams to identify the possible causes of the circuit short See: Diagrams/Electrical Diagrams/Diagrams By Number.
-------------------------------------------------
A4 CHECK THE MIRROR GROUND CIRCUIT FOR CONTINUITY (VEHICLES WITHOUT VIDEO MIRROR AND WITHOUT SYNC)
-
Ignition OFF.
-
Disconnect: Negative Battery Cable.
-
Measure the resistance between the auto-dimming interior mirror C911-3, circuit GD139 (BK/YE), harness side and ground.
