Fusion FWD V6-3.5L (2010)
No
REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation.
-------------------------------------------------
A12 CHECK THE COMPASS (-) COMMUNICATION CIRCUIT FOR AN OPEN OR SHORT TO GROUND (VEHICLES WITHOUT
VIDEO MIRROR AND WITH SYNC)
-
For non-Hybrid vehicles, measure the resistance between the auto-dimming interior mirror C9030-2, circuit VMC30 (BU/GY), harness side and
the IPC C220-23, circuit VMC30 (BU/GY), harness side; and between the auto-dimming interior mirror C9030-2, circuit
VMC30 (BU/GY), harness side and ground.
-
For Hybrid vehicles, measure the resistance between the auto-dimming interior mirror C9030-2, circuit VMC30 (BU/GY), harness side and the
IPC C220-17, circuit VMC30 (BU/GY), harness side; and between the auto-dimming interior mirror C9030-2, circuit
VMC30 (BU/GY), harness side and ground.
-
Is the resistance less than 5 ohms between the auto-dimming interior mirror and the IPC, and greater than 10,000 ohms between the
auto-dimming interior mirror and ground?
Yes
GO to A18.
No
REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation.
-------------------------------------------------
A13 CHECK THE MIRROR POWER CIRCUIT FOR VOLTAGE (VEHICLES WITH VIDEO MIRROR)
-
Ignition OFF.
-
Disconnect: Auto-Dimming Interior Mirror C9039.
-
Ignition ON.
-
Measure the voltage between the auto-dimming interior mirror C9039-1, circuit CBP41 (BU), harness side and ground.
