ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hazard Warning Lamps > < Fog/Driving Lamp Bulb|Service and Repair
Page 2
background image

fog lamps with the bulb removed.

NOTE:  Make sure the headlamp switch and the ignition switch are in the OFF position.

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the 2 outer screws and the 4 front screws from the lower radiator air deflector.

3. Remove the 4 pin-type retainers and the lower radiator air deflector.

4. Disconnect the electrical connector and remove the fog lamp bulb.

5. To install, reverse the removal procedure.

Hazard Warning Lamps > < Fog/Driving Lamp Bulb|Service and Repair