ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3253 > < Initial Inspection and Diagnostic Overview|Page 3251
Page 105
background image

No

GO to AC44.

-------------------------------------------------
AC44 VERIFY VEHICLE EQUIPMENT - DCSM

 

-

Verify whether the vehicle is equipped with a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

GO to AC45. 

No

GO to AC46.

-------------------------------------------------
AC45 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE DCSM DISCONNECTED

 

-

Disconnect: DCSM C3305c .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to AC64. 

No

GO to AC46.

-------------------------------------------------
AC46 VERIFY VEHICLE EQUIPMENT - APIM

 

-

Verify whether the vehicle is equipped with an Accessory Protocol Interface Module (APIM).

-

Is the vehicle equipped with an APIM?

Yes

GO to AC47. 

No

GO to AC48.

-------------------------------------------------
AC47 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE APIM DISCONNECTED

 

Initial Inspection and Diagnostic Overview|Page 3253 > < Initial Inspection and Diagnostic Overview|Page 3251