ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Aisin AW21|Page 4855 > < Aisin AW21|Page 4853
Page 5
background image

Fill the transaxle to the correct transmission fluid level.

9. NOTE: The correct transmission fluid level at cold operating temperature of 15°C-25°C (59°F-77°F) is at the bottom mark on the transmission

fluid level indicator.

If the Transmission Fluid Temperature (TFT) is low, fill the transaxle with transmission fluid to the cold range on the transmission fluid level
indicator. Recheck the transmission fluid level when the transaxle has reached the normal operating temperature.

10. Remove the transmission fluid fill plug.

11. Fill the transaxle with clean transmission fluid.

12. Install the transmission fluid fill plug.

-

Tighten to 39 Nm (29 lb-ft).

Manual Control Lever Shaft and Seal

Manual Control Lever Shaft and Seal

Removal

Aisin AW21|Page 4855 > < Aisin AW21|Page 4853