Fusion FWD Transmission and Drivetrain Service and Repair
3. Disconnect the Transmission Control Switch (TCS) electrical connector.
All vehicles
4. NOTE: Fusion/Milan shown, MKZ similar.
Slide the selector lever knob bezel downward to gain access to the 2 selector lever knob screws.
5. NOTICE: For vehicles equipped with a 2.5L engine, it is necessary to route the Transmission Control Switch (TCS) harness out of the
selector lever bezel when removing the selector lever knob.
NOTE: Fusion/Milan shown, MKZ similar.
Remove the 2 screws from the selector lever knob. Remove the selector lever knob and selector lever knob bezel.
