Fusion FWD V6-3.5L (2010)
Shifter M/T: Service and Repair
Gearshift Lever
Removal
1. Remove the gearshift knob.
2. Open the storage compartment door.
3. Remove the floor console finish panel. Disconnect the electrical connectors.
4. Remove the LH floor console trim panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
5. Disconnect the shift cable and the select cable from the gearshift lever.
6. NOTICE: Carefully disconnect the gearshift cables from the gearshift lever base. Do not damage the gearshift cable retainers.
Disconnect the gearshift cables from the gearshift lever base.
