Removal and Installation Special Tool(s) | Remover, Drop Arm 204-015 (14-008) | Removal | -
Remove the engine undershield. | | -
CAUTION:Use an Allen key to prevent the lower arm ball joint from rotating. CAUTION:Leave the lower arm ball joint retaining nut in place to protect the ball joint stud. Loosen the lower arm ball joint retaining nut. | | -
CAUTION:Protect the ball joint seal using a soft cloth to prevent damage. Using the special tool, detach the lower arm from the lower arm ball joint. - Remove and discard the lower arm ball joint retaining nut.
| Installation | -
WARNING:Install a new lower arm ball joint retaining nut. Failure to follow this instruction may result in personal injury. To Install, reverse the removal procedure. | | |