ford Workshop Repair Guides

Ford Galaxy Workshop Service and Auto Repair Manuals

Brake Master Cylinder - 2.0L-2.3L-1.9L Diesel RHD > < Brake Pedal and Bracket
Hydraulic Brake Actuation - Brake Master Cylinder—2.0L/2.3L/1.9L Diesel LHD Galaxy 2000.75 (04/2000-02/2006)
Removal and Installation

Removal

CAUTION:
CAUTION:If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
All vehicles
  1. Remove the brake fluid reservoir.
    For additional information, refer to Brake Fluid Reservoir - 2.0L/2.3L/1.9L Diesel LHD in this section.
Vehicles with stability assist

  1. Disconnect the brake master cylinder electrical connectors.
All vehicles

  1. CAUTION:
    CAUTION:Cap the brake tubes to prevent fluid loss or dirt ingress.
    Disconnect the brake tubes from the brake master cylinder.

  1. Remove the brake master cylinder.

Installation

  1. CAUTION:
    CAUTION:Before installing the brake master cylinder, make sure that the vacuum seal is in place and that the mating surfaces are clean.
    To install, reverse the removal procedure.
  1. Bleed the brake system. For additional information, refer to Section  206-00 Brake System - General Information.

Brake Master Cylinder - 2.0L-2.3L-1.9L Diesel RHD > < Brake Pedal and Bracket