ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Wheel Speed Sensor > < Hydraulic Control Unit (HCU)

Galaxy 2000.75 (04.2000-02.2006)

Anti-Lock Control - Rear Wheel Speed Sensor Galaxy 2000.75 (04/2000-02/2006)
Removal and Installation

Removal

  1. Remove the wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Disconnect the rear wheel speed sensor electrical connector.
    1. Disconnect the wiring harness from the clamp.
    1. Disconnect the electrical connector.

  1. Detach the rear wheel speed sensor wiring harness from the cross-member.

  1. Detach the rear wheel speed sensor wiring harness from the rear suspension.
    1. Detach the cable from the protective sleeve.
    1. Detach the cable from the clamps.

  1. Remove the rear wheel speed sensor.

Installation

  1. To install, reverse the removal procedure.

Front Wheel Speed Sensor > < Hydraulic Control Unit (HCU)