In-vehicle Repair Removal | -
Remove the engine undershield. | | -
CAUTION:Excessive bending of the exhaust flexible pipe may cause damage resulting in failure. Support the exhaust flexible pipe with a support wrap or suitable splint assembly. | | -
Disconnect the exhaust front pipe from the exhaust manifold. - Discard the gasket and retaining nuts.
| | -
Detach the generator wiring harness support guide from the cylinder head. | | -
Remove the engine support plate bracket. | | -
Remove the generator support bracket. | | -
Remove the exhaust manifold heat shield. | | -
Remove the exhaust manifold. - Discard the gaskets and retaining nuts.
| Installation | -
NOTE:Install new exhaust manifold gaskets and a new exhaust front pipe gasket. NOTE:Install new exhaust manifold and exhaust front pipe retaining nuts. To install, reverse the removal procedure. | | |