Removal and Installation Cord (3 meters in length) Removal | -
Detach the rear drain hose from the roof opening panel. | | -
Detach the auxiliary heater core housing from the rear fender. | | -
Detach the rear drain hose from the retaining clip. | | -
Remove the rear drain hose bung. | | -
NOTE:Attach a suitable length of cord to the rear drain hose, and secure the free end of the cord to the vehicle. Remove the rear drain hose. - Pull the rear drain hose through the D-pillar.
| Installation | -
NOTE:Attach the cord to the rear drain hose. Install the rear drain hose. - Pull the cord and rear drain hose through the D-pillar.
| | -
NOTE:Trim the rear drain hose to the required length. Install the rear drain hose bung. | | -
Attach the rear drain hose to the retaining clip. | | -
Attach the auxiliary heater core housing to the rear fender. | | -
Attach the rear drain hose to the roof opening panel. | | |