Granada L4-140 2.3L VIN A 2-bbl (1982)
Wheel Fastener: Technical Service Bulletins
Aluminum Wheel - New Improved Wrench Adapter
Article No. 85-22-8
WHEEL - ALUMINUM - NEW IMPROVED WRENCH ADAPTER FOR LOCKING LUG NUTS
FORD 1982-85 ALL
LINCOLN-MERCURY 1982-85 ALL
New improved (easier) hex-key wrench adapters are now available for wheel locking lug nuts supplied on vehicles with alloy wheels from model years
1982 through 1985. For Ford Dealers a Master Kit is available, Rotunda Number 013-00003.
Figure 11 - NEW "USER FRIENDLY" HEX-KEY WRENCH ADAPTER
They are considerably easier to use with the vehicle's lug wrench to remove and reinstall the wheel locking lug nut than the adapter originally supplied.
See Figure 11.
A customer who already has factory-supplied wheel locking lug nuts on alloy wheels can now obtain a "User Friendly" replacement adapter, mating up
with the existing locks on the vehicle, by using the following procedure.
You, as the dealership, can order a replacement for your individual customer by ordering from McGard. Please order in the following manner:
-
Use dealership letterhead stationery.
-
Identify your Dealer Code Number.
-
Order must be signed by an authorized agent whose signature is currently on file at McGard.
-
Customer name and address for whom you are ordering.
-
VIN number of vehicle involved.
-
Shipping destination (dealership or customer).
-
Color code and hex size(19 mm, 13/16") of adapter required (or furnish us with the Registration No. of the decal in the trunk).
-
Include $7.00 (U.S. funds) payment or we can bill you later.
Forward all correspondence to:
McGard, Inc. Consumer Service Dept. 852 Kensington Avenue Buffalo, N.Y. 14215 Attn.: Mr. D. Tylec
Phone:
(716) 833-6120
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
