LTD Crown Victoria V8-302 5.0L VIN F FI (1986)
Front Door Panel: Service and Repair
Trim Panel With Manual Windows
Removal
Window Crank Handle/Door Handle
1. Remove interior door handle screw and window crank handle.
2. Remove armrest assembly.
Disconnect any electrical connections in door panel.
3. If installed, remove remote mirror control bezel nut and bezel.
4. Using putty knife or similar tool, carefully pry trim panel retaining clips from door inner panel.
Note: Do not use trim panel to pry clips from door inner panel. Replace any bent, damaged or missing push pins.
5. Remove trim panel from door.
Retain window regulator spring for installation.
Installation
1. Install spring on window regulator.
2. Position trim panel to door and connect electrical connections (if required).