LTD Wagon V8-302 5.0L VIN F 2-bbl (1982)
Door Electrical Connections
3. Remove the retaining screw and the remote mirror bezel nut from the power window regulator housing switch plate and raise the plate to expose
the window switch and power door lock switch, if so equipped, and disconnect.
4. Remove the retaining screws from the armrest finish panel.
5. Remove the retaining screws from the armrest assembly and remove the armrest.
6. Using a wide bladed tool, carefully pry the trim panel plastic push pin retainers from the door inner panel.
Note: Do not use trim panel to pry clips from door inner panel. Replace any bent, damaged or missing push pins.
7. Disconnect the radio speaker wiring, if so equipped.
Remove trim panel and watershield.